Tremco Products

<< Back to All Vendors

Online Store

Items available for purchase in our online store.

Dymonic FC (Fast-Curing Sealant) Tremco

$5.99 - $172.50

High-performance, single-component sealant. Applications include expansion and control joints, precast concrete panel joints, caulking (windows, door, panels), EIFS, aluminum, masonry and vinyl siding.

Vulkem 116 - Tremco

$6.99 - $203.70

Textured, general purpose single-component, moisture-curing, gun-grade polyurethane sealant.

TREMproof 250GC - Tremco

$185.00

Rapid-curing, high-solids, VOC compliant modified polyurethane waterproofing membrane. It can be applied to damp and green concrete.

Comes in a 5-Gal pail.

All Available Products

Items from Tremco that are available by calling (800) 969-1754.

Caulk & Sealants

Dymeric 240 FC Unit: A gun grade, high performance multi-component polyurethane sealant. Applications range from pre-cast tilt-up concrete, masonry, and exterior insulating and finishing systems (EIF), to metal curtain walls, and perimeter joints around doors and windows.

Dymonic FC: Fast curing, low modulus, silane end-capped, polyurethane hybrid sealant. Typical applications include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors, panels), EIFS, aluminum, masonry and vinyl siding. (Purchase Online)

440 Tape: A 100% solid Polyisobutylene cross-lined butyl, preformed sealant. Tape is used for non-compression glazing of vision lites and spandrel panels in PVC metal and wood frames, in low rise building construction.

THC#900: Multi-component, chemical curing polyurethane joint sealant. A self-leveling joint sealant that should be limited to horizontal expansion and control joints with less than a 5% slope. Can be used in parking garages, plaza, terrace decks, and floor and sidewalk joints.

THC#901: Multi-component, chemical curing polyurethane joint sealant. A semi self-leveling joint sealant that is recommended for horizontal expansion and control joints with a slope up to 10%. Can be used in parking garages, plaza, terrace decks, and floor and sidewalk joints.

Tremflex 834: A pure acrylic latex sealant formulated to provide a fast-setting pliable seal with minimal shrinkage. Used for general purpose interior and exterior caulking and as a back bedding glazing compound. Highly recommended as an acoustical seal in the construction of interior walls, ceilings and floors to reduce Sound Transmission Class (STC of partition walls. Ideal for interior joints that will be painted such as door and window frame perimeters and precast concrete plank joints.

TREMstop Silione (Fyre-Sil): A gun-grade, neutral-cure silicone sealant designed for use in Firestop applications including both joints and through-penetrations. Use on metal pipe, plastic pipe, cables, cable trays, ducts and multiple- through-penetrations as well as static joints and dynamic joints in concrete, wood floor/ceiling and gypsum wall assemblies and perimeter fire barrier joints.

Vulkem 45 SSL: A one-part moisture curing, low modulus polyurethane sealant especially developed for sealing joints in level and/or slightly sloped surfaces. Provides exceptional wear and tear resistance required in high traffic areas. Used in expansion joints in sidewalks, swimming pool decks, terraces, parking decks, plazas, floor and other horizontal surfaces with slopes up to 6%.

Vulkem 116: One-part, high-performance polyurethane sealant. General purpose sealant for use on poured concrete, precast, masonry, window and door perimeters, and similar types of construction joints. (Purchase Online)

Waterproofing

Below Grade:

Paraseal: HSPW/Bentonite Sheet Membrane Dual Waterproofing System; Self-sealing sheet waterproofing membrane manufactured to controlled thicknesses of 150 mils to 200 mils of tough, high density polyethylene (HDPE) and expandable granular Bentonite. Used on structures below grade or between slab. Excellent for use on poured and block foundations walls, split slab parking and plaza decks. It has outstanding performance when used under conditions of high water head and installed prior to the concrete pour such as retaining walls, elevator pits, etc. 4’ x 24’ standard rolls.

Permaquick PQ200: Crystalline capillary waterproof coating. Ideal for stopping water in all concrete structures: water tanks, basement walls, tunnels, lift pits, waterproofing floor slabs, swimming pools, and sewerage treatment plants.

TremDrain Series Drainage Mats: Multi-Composite Drainage and Protection Boards

Vulkem 201(Roller Grad): Fluid-applied, elastomeric coal-tar free waterproofing. Designed for use on backfilled walls and planters and may be used in split slab applications.

TREMproof 250GC: Rapid-curing, high-solids, VOC compliant modified polyurethane waterproofing membrane. It can be applied to damp and green concrete. (Purchase Online)

Deck Coatings:

Vulkem 350/351: Composite waterproofing system comprised of tough-curing liquid polyurethane. The system uses an aggregate-laden top membrane to aid in slip-resistance and wear-resistance. May be used to apply a seamless, monolithic waterproof membrane to concrete surfaces. A cold-applied deck coating system designed for waterproofing plaza decks, pedestrian walkways and balconies.

Vulkem 350/351/346: A modified polyurethane Traffic Deck Coatings Systems comprised of a base coat (350), heavy duty intermediate coat (345) and a top coat (346). Designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. A cold applied Traffic Deck Coating System designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage.

Air Barrier

ExoAir 110AT: A 22-mil composite impermeable membrane that is comprised of 16 mils of butyl and 6 mils of HDPP facer. It can be used as the membrane, detailing accessory, as well as thru-wall flashing of an air barrier system.

ExoAir 110: A composite 40-mil sheet designed for use as the membrane or as a component of an air barrier system.

ExoAir 230: Fluid-applied synthetic permeable air barrier membrane is a monolithic, elastomeric membrane designed to be rolled or sprayed onto exterior above-grade wall assemblies to mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor.

ExoAir 220: Fluid-applied permeable air barrier membrane is a monolithic, elastomeric membrane designed to be rolled or sprayed onto exterior above-grade wall assemblies to mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor.

ExoAir 130: Fluid-applied permeable air barrier membrane is a monolithic, elastomeric membrane designed to seal exterior above-grade wall assemblies and mitigate air infiltration/exfiltration, vapor transmission and water penetration. It is available in a single grade that can be roller or spray applied using the appropriate spraying equipment.

ExoAir 120: Fluid-applied permeable air and vapor barrier membrane is a monolithic, elastomeric membrane designed to seal exterior above-grade wall assemblies and mitigate air infiltration/exfiltration, vapor transmission and water penetration.

Tremco Resources and Links

*Data Sheet Terms & Disclosures: Any material accessed, downloaded or obtained through RL Wurz's Website is done so at the user's discretion and sole risk. RL Wurz does not guarantee the accuracy, quality or content of any of the documents provided. All documents are in pdf format and have been compiled from manufacturer websites and updated on a regular basis.